Aluminum silicate fiber wool installation requirements
Release time:
2023-10-30
We all know that aluminum silicate fiber cotton is a good fireproof and refractory material, but even the best material needs to be used correctly to be effective.
We all know that aluminum silicate fiber cotton is a good fireproof and refractory material, but even the best material needs to be used correctly to be effective. Therefore, the technical staff of our factory put forward the installation requirements of aluminum silicate fiber cotton, the main contents of which are:
1. The welding position of the anchor nail should be accurate, and the error should be strictly controlled.
2. The backing layer is installed first, and then the aluminum silicate fiber cotton is constructed.
3. Install the furnace top module first, and then install the furnace wall.
4. The installation of the furnace wall module should be installed from the bottom and upwards.
5. The arrangement of the modules is mostly arranged in the same direction, and the lining and compensation blanket should be compressed and laid according to the requirements after the installation of a row of modules.
6. The connection between the top and the wall and the wall should be compressed and lined with a compensation blanket.
After the installation of aluminum silicate fiber cotton is completed, it should be carefully inspected, and the gap greater than 5mm should be filled with a compensation blanket; After the aluminum silicate fiber cotton is filled, the surface of the folding module is flattened with a square wooden board. In addition, the majority of users are reminded that the installation is carried out by the manufacturer or professional construction team to avoid affecting the product performance due to installation problems.
Related News
Address
West of Qingyuan Road, South Side of Chenggaoyuan Road, Gaoqing County, Zibo, Shandong
Key words: Smoke control and fire protection ceramic fiber series aluminum silicate fiber series